Control your operations safely and easily with our InteliGen NT BaseBox controller, ensuring greater safety, user protection and minimal downtime.

The InteliGen NT BaseBox offers: 

• AirGateComAp’s controllers incorporate AirGate connection technology to make access to the internet as simple as possible. AirGate enables our controllers to connect to the internet using the existing network infrastructure, negotiating firewalls and VPN systems and removing the requirement for static and public IP addresses. 2.0 technology for easy connection to your equipment remotely, without worrying for about your asset’s IP address  
• Built-in PLCComAp has integrated Programable Logic Controller tightly with our standard line of controllers. This helps our customers to cut costs, minimise points of failure for advanced systems, and overcome any challenge that may occur. interpreter with the use of ComAp's free PLC Editor 
• User-defined protections and setpoints on top of default protection
• Controller redundancyRedundancy in critical backup power systems is essential to ensure that the power is never compromised. Our controllers allow for installing a second controller to continuously monitor for potential failure. minimising solution downtime and ensuring the power isn’t compromised 
• More precise measuring with a True Root Mean Square measurement feature 
• Remote control and monitoring of your gen-set operations with WebSupervisor, our cloud-based fleet management tool
• Compatible load/Var sharing and power managementOur system allows for up to 32 generators running in parallel, regardless of whether the generators are of different sizes, power outputs, and from different manufactures. The system is highly adaptive and can create up to 4 different schemes of power management that can be switched with a simple switch. with other ComAp solutions*
• Droop regulation allowing load and Var sharing when the inter-controller’s communication is lost
• Start-up synchronisationComAp’s Start-up synchronisation eliminates any blackout time, and the start-up time is the same for sites running 2, 10, or even 30 gen-sets. To avoid delaying availability of the system due to slow-starting generators or other problems, any engines that fail to reach running speed with a specified time are rejected from the scheme and, if able, are left to perform traditional synchronising after the majority of sets have become available. to minimise the paralleling start sequence time and get the gen-set system up and running with the minimum possible delay
• Dynamic spinning reserveDynamic Spinning Reserve allows the system to react flexibly to changes in power produced by renewable energy sources. ComAp controllers can react to requested spinning reserve and keep the sufficient amount of gen-sets running to cover the drop-in output of the renewable source (e.g. when cloud cover is heavier). helping to deliver maximum amount of available energy from photovoltaics ** 
• Faster and cost-effective operations with signal sharing over a CAN bus across a group of control units 
• Possibility to have a mains application in a gen-set controller with firmware upload functions
• Event-based history for fast and easy troubleshooting 
• Automatic Mains Failure that ensures automatic start of gen-sets and minimises downtime
• Peak shaving for limiting the import from the mains (e.g. due to higher prices) 
• Load shedding ensuring the most important loads are running even when there is a lack of power
• Compatible with the following remote displays
  • InteliVision 5
  • InteliVision 8
  • InteliVision 12Touch
  • InteliVision 18Touch

* Feature available with a hardware dongle.

** Feature available with a software key. 

InteliGen NT BaseBox GeCon Marine

Reliable marine-certified generator and gen-set controller with PLC capabilities, enabing flexible operations, on-site and remote monitoring of simple and complex marine applications.

The InteliGen NT BaseBox GeCon Marine offers:

• Main functions: AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)
• Faster and cost-effective operations with signal sharing over a CAN bus
• Automatic synchronisation and power control via speed governor or ECU
• Measurement of both generator and mains side
• Configurable inputs and outputs enabling customers to design functions according to their various needs
• Bi-polar binary outputs
• Event-based history for fast and easy troubleshooting
• Controller redundancy minimising solution downtime and ensuring the power isn’t compromised
• Integrated PLC programmable functions
• Embedded fixed and configurable generator protection
• Easy customisation of the firmware solution according to your requirements
• Recommended to use with external colour displays InteliVision 8 or InteliVision 5
• The controller has been certified by the following marine organisations: DNV, LR, ABS, BV, RINA, CRS, CCS 

To run the GeCon software you need to order InteliGen NT BaseBox, and then install the correct GeCon software:

• GeCon LandBased (included in standard firmware)
• GeCon Marine (special dedicated marine firmware)
• IGS-NT-LSM+PMS dongle (required for Load sharing and Power Management)