InteliSys NTC Hybrid

Order code: IS-NTC HYBRID

This product is obsolete, availability might be limited.

InteliSys NTC Hybrid is a controller for hybrid microgrid applications, supporting the combination of renewable energy sources with gen-sets. The controller can be used for both on-grid and off-grid applications to help optimise the use of renewable energy and reduce your carbon footprint.

Dynamic spinning reserve
Import/Export control at point of connection
Modbus RTU or Modbus TCP communication
Support for InteliGen and InteliSys controllers

984 KB

English (11 Jan 2024)

Manuals

10 files

1.75 MB

English (25 Jan 2023)

1.17 MB

English (6 Jun 2025)

4.21 MB

English (2 Oct 2023)

483 KB

English (25 Jan 2023)

576 KB

English (25 Jan 2023)

2.79 MB

English (16 Oct 2024)

5 MB

English (23 May 2023)

629 KB

English (23 May 2023)

13.38 MB

English (23 May 2023)

138 KB

English (23 May 2023)

Software

8 files

29.04 MB

(6 Jun 2025)

4.25 MB

(13 Jun 2023)

364 KB

(25 Jan 2023)

61.04 MB

(25 Jan 2023)

28.2 MB

(23 May 2023)

38.42 MB

(25 Jan 2023)

3.6 MB

(23 May 2023)

3.71 MB

(23 May 2023)

Certifications

2 files

CE for IG-IS-IM Controllers

628 KB

English (3 Feb 2023)

518 KB

English (25 Jan 2023)

Brochures

3 files

AUS Microgrid Brochure_Final

1.44 MB

English (24 Sep 2024)

5.12 MB

English (25 Jan 2023)

Chinese

7.1 MB 23 May 2023

Final-Control-Solutions-Overview-WEB

5.12 MB

English (25 Jan 2023)

Show resource hub for this product

Overview
Related products
Extended features
Resources

Overview
Related products
Extended features
Resources

InteliSys NTC Hybrid

A standalone controller for hybrid applications, the InteliSys NTC Hybrid continuously monitors data from the various energy sources in a hybrid microgrid, including photovoltaics, wind turbines, hydro power sources, gen-sets and battery energy storage.

The InteliSys NTC Hybrid offers:

Interface to photovoltaic inverters using Modbus RTU or TCP via an additional PLC module, InteliFieldbus Gateway
CAN interface communication to ComAp’s InteliGen and InteliSys gen-set controllers (IGS-NT-Hybrid 2.2.2 firmware and hybrid software key is needed for compatibility and to prevent the gen-set from underloading)
Optimised system efficiency by minimising the necessary dynamic spinning reserve while ensuring stable power when the photovoltaic output drops
Smart power managementOur system allows for up to 32 generators running in parallel, regardless of whether the generators are of different sizes, power outputs, and from different manufactures. The system is highly adaptive and can create up to 4 different schemes of power management that can be switched with a simple switch. , automatically selecting the most efficient combination of gen-sets to maximise fuel savings
Monitoring and regulation of the photovoltaic inverter output to prevent the engine from running underloaded
Built-in PLCComAp has integrated Programable Logic Controller tightly with our standard line of controllers. This helps our customers to cut costs, minimise points of failure for advanced systems, and overcome any challenge that may occur. for easy configuring and complex site control
Synchronisation with the mains and export/import limitation control to fulfil the utilities needs in on-grid applications
AirGateComAp’s controllers incorporate AirGate connection technology to make access to the internet as simple as possible. AirGate enables our controllers to connect to the internet using the existing network infrastructure, negotiating firewalls and VPN systems and removing the requirement for static and public IP addresses. for easy connection to your equipment remotely, without worrying about your asset’s IP address
Remote control and monitoring of your gen-set operations with WebSupervisor, our cloud-based fleet management tool
Detailed data information about energy needs and gen-set fuel consumption

Alternative products

InteliSys NTC BaseBox

InteliSys NTC BaseBox is a controller with a broad range of communication and PLC capabilities for single or multiple gen-sets operating in stand-by or parallel mode. Intended primarily for CHP and switchgear applications, it will help you with secure on-site and remote monitoring of various installations such micro CHP, datacentres, hospitals or banks.

InteliGen NTC BaseBox

InteliGen NTC BaseBox is a controller with a broad range of communication capabilities for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this controller will ensure secure on-site and remote monitoring of your critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen NTC BaseBox is one of the earlier versions of our advanced controller InteliGen 1000.

InteliGen NT BaseBox

InteliGen NT BaseBox is a controller for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this controller will ensure secure remote monitoring of your critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen NT BaseBox is an earlier generation controller of our advanced InteliGen 1000.

InteliGateway 300

InteliGateway 300 is a new generation versatile communication gateway that seamlessly connects multiple Modbus devices to ComAp’s WebSupervisor and InteliScada monitoring systems and to ComAp’s controllers.

InteliGateway 301

InteliGateway 301 is a versatile gateway module that seamlessly connects multiple Modbus devices to ComAp’s WebSupervisor and InteliScada monitoring systems, as well as to ComAp's controllers. This gateway product is enhanced with new features such as 4G cellular connectivity and GNSS capability.

Accessories

InteliFieldbus Gateway

InteliFieldbus Gateway is a versatile communication gateway that seamlessly connects multiple Modbus TCP/RTU devices to ComAp’s WebSupervisor and InteliScada monitoring systems and to ComAp’s controllers.

InteliVision 5 CAN

InteliVision 5 CAN is an easy-to-use industrial operator panel equipped with 5,7” colour screen for monitoring of single gen-sets for various applications. This intuitive plug&play solution with a CAN bus interface provides comprehensive visual overview of all engine data and monitoring information on a colourful display. The display has a robust and resilient design and can be used without any problems in environments with extreme conditions.

InteliVision 8

InteliVision 8, industrial operator panel equipped with 8” colour screen, is designed to support the monitoring and control of single gen-sets’ operations for various applications. A simple and easy-to-use plug&play solution, it provides comprehensive overview of all engine data, monitoring information and trend history. The InteliVision 8 is intended for the ComAp InteliGen NT, InteSys NT, InteliMains and InteliDrive family of controllers.

InternetBridge-NT 4G

Communication module for internet connection to one or more controllers. This module enables remote communication for asset monitoring via both wired and wireless connection.

InteliVision 12Touch

Intuitive, easy-to-use and simple to configure, the InteliVision 12Touch is an industrial operator panel equipped with 12.1” colour, multi-touch screen. Compatible with the majority of ComAp’s controllers, it provides comprehensive visual overview to monitor and control single gen-sets for various applications.

Extended Features

Extended Feature - Variable speed generator (VSG)

Unlocking a transformative function, this extended feature allows your generator to directly connect to engines without the need for a Variable Frequency Drive (VFD). The solution will help elevate power generation capabilities, enhance efficiency, and reduce costs.

Frequently Asked Questions

Show all

Can I unlock my controller?

If you have forgotten your controller password, it can be found using the password decode function.

You will need the following information about your device:

serial number
"password decode" number

Both numbers can be obtained through the monitoring software relevant to the device.

Serial number is available in Controller info
Password decode number is available in Values / Info

You can also show these numbers on your device's display. Typically, this requires a sequence or combination of buttons to be pressed. Details can be found typically in the device Operator guide.

Once you have these numbers, please contact your ComAp distributor and they will help you get your password back.

I cannot program my controller, it looks dead. How do I restore a controller with broken firmware?

The controller firmware does not usually break by itself however it can be damaged during controller programming, typically if power is lost during the process. If there does not seem to be a hardware issue with the controller there is an option to restore the controller using a process called ‘Boot Jumper’ programming.

This can be described as a sequence of steps you need to perform to allow the configuration tool to write new firmware into the device.

The steps typically are:

Physically connect the controller to your PC.
Power the controller on and initiate connection and firmware programming from the software tool menu.
The software will ask you to switch the device off, close the Boot Jumper and switch the device back on.
The programming will then proceed and you will receive further instructions during the process.

The boot jumper can be found either on the communication module (where plug-in modules are used) or on the device itself, typically under a rubber grommet, next to the dongle slot.

The description above is not enough? Try our Booot jumper training video.

How do I connect to my ComAp controller? What types of connections are supported?

ComAp offers a wide range of options to connect to your controller:

RS232 / RS485
USB - USB A<->B (usually a printer cable)
Internet connection - LAN, GPRS, 3G, 4G

Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT).

Each ComAp device usually allows for multiple ways of connection. The simplest one supported by the majority of our devices is the RS232 (serial) connection. For this, you need an RS232 cable (null modem) and if your PC is not equipped with an RS232 port you need a USB<->RS232 converter.
USB connections are very common. Almost all ComAp devices support connection using simple USB A<->B cable (printer cable) for easy configuration. Some devices can be powered from the USB port for programming to allow easy configuration right on your desk.
Other connection types: Internet connection (LAN, GPRS, 3G, 4G), Modbus RTU, Modbus TCP, SNMP, AirGate, Modem.
Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT). Not all types of connection are possible on each device. You can find all the details related to this topic in your device's Comprehensive guide or Communication guide.

Detailed information about connection to:
InteliLite NT, InteliATS NT, InteliCompact NT is available IL-NT, IA-NT, IC-NT Communication Guide (page 21)
InteliGen-NT, InteliSys-NT, InteliMains-NT is available in IGS-NT Communication Guide (page 19)
InteliLite is available in Global Guide InteliLite AMF25 Global Guide (page 126)

I cannot connect to my controller using the Internet or AirGate connection, why?

Usually connecting to the controller over the internet is straightforward and works out of the box. However, there are a few parameters that need to be set correctly.

Make sure you have the latest firmware in the controller itself but also in all the communication modules (plug-in, built-in or external).
- Communication modules that supports connection via the internet
  - CM-4G-GPS
  - CM-Ethernet
  - CM-GPRS
  - InternetBridge-NT 4G
  - InternetBridge-NT
  - IB-Lite
  - IB-COM (Built-in communication module for NTC controllers)
  - IL-NT GPRS

Ensure the communication interface is configured correctly.
- CM-4G-GPS, CM-Ethernet, CM-GPRS - Can be set in the controllers setpoints on the unit itself or using InteliConfig configuration software.
- IB-COM, IB-Lite - Use web interface - just connect to http://<controller-ip-address>/sp_index.htm using your favourite web browser.
- InternetBridge-NT 4G, InternetBridge-NT - Requires a software tool called IBNTConfig(https://www.comap-control.com/products/detail/ib-nt-config) and an USB A<->B cable for configuration. This way you can also enable MODBUS, SNMP etc.

Make sure there is no firewall blocking your connection. Consult your IT specialist or ISP if not sure. If you use a firewall, make sure the following ports are open for communication:
- The device must be able to send data to the AirGate server at UDP port 6127 and TCP port 23. The TCP port can be changed in the module setup to 21 if needed.
- TCP port 44445 is required for WebSupervisor connection.
- Port 80 is used for accessing the communication module web interface.
- Port 502 is used for Modbus TCP communication (enabled by default).
- Port 161 is used for SNMP (needs to be enabled).

How do I change the controller firmware? Where can I get the latest firmware?

You can download the latest firmware package on the webpage of the device. You can easily navigate there through the ‘Products’ section or just use the Search function. If you cannot find the firmware on the website or if you require different than the offered version do not hesitate to contact our support team.

The firmware upgrade itself is easy to perform. You need the appropriate configuration software and a connection to the controller (preferably a direct connection). Prior to initiating the update process, we strongly recommend you to save a complete backup of your device.

It usually consists of several steps:

Create a controller back up.
Update the device firmware. It will contain default Configuration Archive and default Application.
Change the Application (SPtM, MiNT, MCB, MGCB, BTB, etc) to the required type (by programming appropriate default archive to the controller).
Use the Import Configuration Wizard to restore your previous configuration. In some cases manual interventions might be needed during this step.
Optional: Update the connected display firmware or device communication module firmware.

Should you be unsuccessful in programming the new version, the rollback procedure is to install previous firmware version and use your back up to restore the controller to its original state before the firmware upgrade was attempted.