Switchgear Control and Protections

Switchgear and protection controllers essential for all applications where generators operate in parallel with the mains.

Mains Controllers
ATS Controllers
Mains Protections

Mains controllers

InteliMains_1010
InteliMains 1010
InteliMains 1010 is the most advanced ComAp mains/utility/tie-breaker supervision controller for complex applications. Designed following top IT security standards to protect your operations, the InteliMains 1010 acts as a relay for mains protection and helps synchronise your gen-sets to the mains/utility for switchgear applications and critical infrastructure installations, such as datacentres, hospitals or banks. 
 
InteliMains 1010 SC
InteliMains 1010 SC
The InteliMains 1010 SC is designed for Utility and Tie Breaker points of connection for complex paralleling application to provide system synchronising, load and var/pf control. This controller is intended for applications where system control is driven either from panel switches or from an upper- level device such as a system PLC. The InteliMains 1010 SC can also be programmed to allow another level of system electrical protections. This device is simple to configure and and operate, which will reduce engineering and commissioning times.
 
InteliMains_510
InteliMains 510
InteliMains 510 is the mains supervision controller used for synchronising set of gensets to the Mains/Utility or bus-tie-breaker operations, primarily intended for switchgear and targeting advanced and more complex applications.
 
InteliMains_210_G2_ComAp
InteliMains 210 G2
InteliMains 210 G2 is the mains supervision controller used for synchronising a set of gen-sets to the Mains/Utility or bus-tie-breaker operations, primarily intended for standard switchgear applications.
 

ATS controllers

InteliATS2_70_main
InteliATS2 70
InteliATS2 70 is an Automatic Transfer Switch (ATS) controller for easy and fast switching between two independent power sources. It monitors and controls the mains supply and its voltage, frequency, and current, with the possibility to connect to a single gen-set. The InteliATS2 70 is designed with high-level security features, and it is easy to use and configure using ComAp’s InteliConfig configuration tool. InteliATS2 controllers are ideal for managing switching power supply in various settings such as administration buildings, schools, factories, hospitality, and other facilities to avoid power outages and potential financial or material damages.
 
InteliATS2_50_main
InteliATS2 50
InteliATS2 50 is an Automatic Transfer Switch (ATS) controller for easy and fast switching between two independent power sources. It monitors and controls the mains supply and its voltage and frequency, with the possibility to connect to a single gen-set. The InteliATS2 50 is designed with high-level security features, and it’s easy to use and configure using ComAp’s InteliConfig configuration tool. InteliATS2 controllers are ideal for managing switching power supply in various settings such as administration buildings, schools, factories, hospitality, and other facilities to avoid power outages and potential financial or material damages.
 

Mains protections

product image
MainsPro
MainsPro is an easy-to-install mains protection relay for parallel-to-mains applications. It reliably monitors voltage, frequency and loss of mains protections to safeguard both the distribution network and the generators. This protection relay is designed for installations with renewable energy sources such as photovoltaic plants, gen-sets, cogeneration units, and microturbines.
 
MainsPro_G99TT_main
MainsPro G99TT with seal
MainsPro G99TT is an easy-to-install mains protection relay for parallel-to-mains applications. It reliably monitors voltage, frequency and loss of mains protections to safeguard both the distribution network and the generators. This protection relay is designed for installations with renewable energy sources such as photovoltaic plants, gen-sets, cogeneration units, and microturbines.
 
MainsPro_Lite_main
MainsPro Lite
MainsPro LITE combines simple installation and easy use with valuable mains protection. It offers essential protection against power supply to an islanded grid from the mains and is especially useful for installations where vector shift and rate of change of frequency protections are not required. The MainsPro LITE is a cost-effective solution for mains connected applications, including gen-sets and renewable energy sources.
 

Contact your local ComAp representative

Didn't find what you were looking for? Contact us, we’ll be happy to answer any questions you may have and help you with your business needs.

See Local Contacts

Interested in another country? Find your local representative. 

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .